6R80-A TransGo SHIFT KIT® Valve Body Repair Kit

TransGo 6R80 SHIFT KIT® Valve Body Repair Kit fits 2006-14 Ford vehicles equipped with a GEN1 6R80

Common concerns with this transmission are TCC shudder, rough coast down shifts, gear ratio error and solenoid performance codes. Firstly, these complaints are the result of the wear in the pressure regulator (PR) valve bore and the pressure regulator valve balance bushing. Secondly, the torque converter clutch regulator valve design and calibration were in dire need of an upgrade to address the TCC shudder complaint.

Features and benefits:

The kit includes a hardened steel drop-in two-piece pressure regulator and a redesigned TCC regulator valves for a quick, no-hassle install and requires no reaming or tooling.

Both the redesigned drop-in steel PR valve and TCC regulator valve feature longer lands, which restores the hydraulic integrity of the circuit by utilizing previously unused and, therefore, unworn areas of their bore. Furthermore, the longer lands increase bore longevity by redistributing the load over a greater surface area. The kit also includes new rubber dampener inserts that flatten out over time and new wire retainer clips to replace the occasional broken one.

Corrects/Prevents/Reduces:

• Gear ratio codes: P0731, P0732, P0733, P0734, P0729
• Shift error codes: P0781, P0782, P0783, P0784, P0829
• 28-46 MPH TCC shudder due to TCC regulator malfunction
• Erratic pressure due to PR valve malfunction
• Soft or long shifts
• TCC slip
• Coast downshift clunk

Includes:

• (1) Drop-in USA-made hardened steel PR valve
• (1) PR valve spring
• (2) USA-made aluminum PR valve boost bushings
• (1) Drop-in USA-made hardened steel TCC regulator valve
• (2) TCC calibration springs, import and domestic
• (4) New wire retainers
• (6) New dampener rubber inserts